Power Amplifier, 600W, 4-channel, US
Model: PRM-4P600-US
- 4-channel amplifier, with a total powerTANK capacity of 600 W
- dualCOOL convection cooling with additional intelligent fan in case of extreme thermal conditions
- ecoRAIL and APD deliver significant reduction in power consumption
- Variable Load Drive (VLD) providing the same power into 4, 8, 70 V or 100 V
- amp-LINK single cable solution for easy installation
The PRM-4P600 is a 600 W power amplifier with powerTANK technology that flexibly delivers the total power over its 4 channels.
powerTANK
powerTANK is a reservoir of available amplification power that is deployed flexibly across the 4 channels of the amplifier. There is no need to set up the powerTANK as it adapts to the requirements of each zone or output without extra manual configuration of each individual channel.
Variable Load Drive
Variable Load Drive (VLD) ensures that the powerTANK capacity is utilized efficiently, providing consistent power to any channel with any impedance.
dualCOOL
The dualCOOL thermal design means that the amplifier typically operates as a convection cooled amplifier, but in extreme thermal conditions the amplifier is also equipped with an intelligent multi-speed fan to ensure maximum performance and reliability in any application.
ecoRAIL
ecoRAIL’s power consumption is similar to a regular standby level, yet ecoRAIL still produces audio output suitable for background music levels, and the Auto Power Down (APD) mode can be engaged to further reduce power consumption to less than a watt when there is no signal present for extended periods.
amp-LINK
The single cable installation feature of amp-LINK is compatible with AES72-1E (RJ45 connectors) wired devices. This solution provides easy installation for all four channels without needing to wire all the connections individually.
PFC power supply
Equipped with a PFC power supply and protection features usually reserved for the professional power amplifiers, means that the amplifier resists complete shutdown situations and will always perform at its best under all conditions.
Architects’ and engineers’ specifications
The 4-channel amplifier shall have a total power of 600 W, be able to adapt the power of the output channels with power sharing in either 4 ohm, 8 ohm, 70 V or 100 V conditions on any channel simultaneously. The amplifier housing shall be a 1” rack unit size design. The amplifier shall have a thermal design that can operate as passive cooled device, but also be able to activate forced air-cooling.
- 4-channel amplifier, with a total powerTANK capacity of 600 W
- dualCOOL convection cooling with additional intelligent fan in case of extreme thermal conditions
- ecoRAIL and APD deliver significant reduction in power consumption
- Variable Load Drive (VLD) providing the same power into 4, 8, 70 V or 100 V
- amp-LINK single cable solution for easy installation
- Amplifier Type - Power Amplifier
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 23 F
- Mounting Width: 19 in
- Maximum Frequency Response (Bandwidth): 150 kHz
- Maximum Frequency Response (Bandwidth): 150000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Certifications: EN/IEC/CSA/UL
- Impedance: 8 ohm
- Number of Channels: 4
- Number of Watts Per Channel: 150 Watt
- Depth: 10.60 in
- Height: 1.74 in
- Width: 19.20 in
- Product Weight: 7.90 lbs
- Color: Black
- Active Power: 600 Watt
- Output Power: 4 OHMS, 8 OHMS, 70 V, 100 V
- Maximum output power per channel (power sharing)1 at minimum impedance: 500 W, 600 W, 500 W, 600 W
- Output voltage rated output power: 24.5 VRMS, 34.6 VRMS, 70.7 VRMS, 100 VRMS
- Maximum Output Voltage: 40.0 VRMS, 56.0 VRMS, 70.7 VRMS, 100 VRMS
- Rated impedance per channel: 4 OHMS, 8 OHMS, 33.3 OHMS, 66.7 OHMS
- Minimum impedance per channel: 2.6 OHMS, 4 OHMS, 10 OHMS, 16.7 OHMS
- Amplifier: 4 OHMS, 8 OHMS, 70 V, 100 V
- Nominal Gain (+6 dBu input sensitivity, LEVEL 0 dB): 24.0 dB, 27.0 dB, 33.2 dB, 36.2 dB
- Maximum Gain (0 dBu input sensitivity, LEVEL +6 dB): 30.0 dB, 33.0 dB, 39.2 dB, 42.2 dB
- THD+N(1/8 rated output power, 1 kHz): < 0.1 %
- Crosstalk(ref. 1 kHz, 12 dB below maximum): < -70 dB, < -75 dB, < -90 dB, < -95 dB
- Frequency Response2(ref. 1 kHz, analog in to speaker out, -3 dB): HP: 30/100/150 Hz to 20 kHzLP: 30 Hz to 150 Hz, HP: 50/100/150 Hz to 20 kHzLP: 50 Hz to 150 Hz
- Damping Factor(30/50 Hz to 1 kHz, ref. to rated impedance): > 80, > 160, > 500, > 1000
- Output Stage Topology: Class D, fixed frequency
- Signal to Noise Ratio(A-weighted, ref. to rated output power, LEVEL 0 dB): > 98 dB, > 100 dB, > 101 dB, > 103 dB
- Output Noise(A-weighted, LEVEL 0 dB): < -68 dBu, < -67 dBu, < -62 dBu, < -61 dBu
Coffman Media
5995 Wilcox Place
Suite A
Dublin, OH 43016
USA
(614) 389-3456
https://www.coffmanmedia.com/