Speakers : Horns : Electro-Voice - ID60DT

Commercial Sound Compression Driver

Model: ID60DT

Speaker Type - Paging Horns

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The ID60DT is a 60-watt, heavy-duty driver for re-entrant horns. This driver is designed for use in applications that require continuous, high-level, acoustic output such as high-level public address. The ID60DT features rugged, weather-resistant, phenolic diaphragms, indoor and outdoor packaging, and a one-inch, screw-on exit.

Speaker Type - Paging Horns

Frequency Response: 300 - 4,000 Hz ±5 dB (see Figure 2)
Power Handling, 8 hours, 6-dB crest factor: 60 watts (500-5,000 Hz pink noise)
Impedance,: Nominal: 8 ohms
Minimum:7.5 ohms (Cobraflex Horns above 500 Hz)
Voice Coil Diameter: 5.08 cm (2.0 in.)
Magnet Weight: 0.48 kg (1.06 lb)
Magnet Material: Strontium ferrite
Flux Density: 1.17 Tesla
Construction: Rugged diecast housing with weatherproof finish for outdoor use
Mechanical Construction of Driver: 1 3/8"-18 thread, 1/2 long allows the ID60 to be mounted on any University Sound horn.
Diameter: 14.3 cm (5.6 in.)
Net Weight:
- ID60D-8: 2.7 kg (5.9 lb)
- ID60DT: 3.4 kg (7.4 lb)
Recommended Horns: Cobreflex IIB, Cobreflex III, PH, 2WP, SMH, SH
Maximum Frequency Response (Bandwidth): 4000 Hz
Maximum Frequency Response (Bandwidth): 4 kHz
Minimum Frequency Response (Bandwidth): 300 Hz
Minimum Frequency Response (Bandwidth): 0.30 kHz
Impedance: 8 ohm
Height: 16.20 in
Shipping Weight: 7.94 lbs
Product Weight: 7.50 lbs

Cobreflex IIB - Electro-Voice® Commercial Sound Horn

Electro-Voice - Commercial Sound Compression Driver 271022 kb - Other

Project List