Microphones : Boundary Microphones : Electro-Voice - PC Boundary

Dual Condensor Multi-Pattern Boundary Microphone

Model: PC Boundary

Omni, cardioid, supercardioid polar patterns
RF shield provides superior RFI/GSM shielding
Consistent microphone voicing across all four patterns
Easy to use mute switch
Mute switch can be programmed to operate as either latching on/off or momentary push-to-mute/push-to-talk

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

PC Boundary is a very low-profile area microphone that can be used on any surface and with virtually any mic mixer. Featuring multiple on-board polar patterns, three directional and one omni. PC Boundary is ideal for any installation where premium-grade area coverage is required. PC Boundary mic is a member of the EV PolarChoice series of multi-pattern microphones and is highly-shielded from RFI/GSM thanks to EV’s exclusive RF shield technology. The multi-pattern versatility of the PolarChoice microphone makes it a true problem solver. With one non directional and three directional polar patterns available, PolarChoice microphones are ideal for virtually any installation.

Omni, cardioid, supercardioid polar patterns
RF shield provides superior RFI/GSM shielding
Consistent microphone voicing across all four patterns
Easy to use mute switch
Mute switch can be programmed to operate as either latching on/off or momentary push-to-mute/push-to-talk
Disassembly of the mic isn’t required to change switch functions or for use with automatic mixers
Compatible with echo cancellation for conference applications
High visibility blue LED clearly displays mic status to the user and can be remotely controlled in automatic mixer mode
Pin 2 positive, referenced to Pin 3, with positive pressure on the diaphragm

Polar/Pickup Pattern - Cardiod
Polar/Pickup Pattern - Supercardiod
Microphone Type - Boundary
Microphone Type - Condenser
Microphone Type - Electret Condenser
Microphone Connectivity - Wired
Polar/Pickup Pattern - Omnidirectional
Spec Sheet available - Yes

Cable Length: 10 ft
Maximum Frequency Response (Bandwidth): 20,000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Minimum Frequency Response (Bandwidth): 50 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Generation Element: Dual condenser, back-electret
Clipping Level (1% THD): >120 dB (SPL)
Sensitivity, Open Circuit Voltage, 1kHz: 31.5 mV/Pa
Dynamic Range: >94 dB
Equivalent Noise (A weighted): 26 dB (SPL )
Output Impedance, 1kHz: 200 ohms
Phantom Power Requirements: 12 to 52 VDC
Finish: Non-reflective camera black
Current Consumption: <5 mA (with P48 supply)
Cable: 10ft, 5-conductor (2-conductor shielded) black cable, terminated with a professional 3-pin male XLR style connector with gold plated pins
Length: 4.34 in
Height: 1.02 in
Width: 2.54 in
Product Weight: 0.59 lbs

Boundary Microphone 1002 kb - Data Sheet

Project List