Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
ConvertIP Dual-channel RJ45 HDMI-to-IP Converter
Series: ConvertIP
Model: CIP-DRH
- HDMI I/O
- Multi-network support
- 3x RJ45 1G network support
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
Product Info
Tech Specs
Related Products
Documents
Videos
Matrox ConvertIP DRH is a compact, standalone input/output device capable of receiving or transmitting ST 2110 or IPMX signals. Featuring HDMI I/O and three RJ45 ports on a single device, ConvertIP DRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can deliver power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
- HDMI I/O
- Multi-network support
- 3x RJ45 1G network support
- Fanless design for quiet cooling
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Optional bracket for VESA mounting behind monitors
- Optional 1 RU rack shelf that holds two appliances
- Optional fault-tolerant hot-swappable rack-mountable power supply
- Single device can be configured as a transmitter or receiver
- Imperceptible latency with exceptional 4K image quality
- Optional JPEG XS license
- IPMX ready
- Complimentary web interface for centralized management of ConvertIP devices
- Optional Matrox ConductIP software license for discovery and routing
- Compact form factor mounts easily to the back of a monitor
- Converter Signal Types - Audio & Video
- Converter Type - Up/Down Converter
- Rackmountable - Yes
- ROHS Compliant - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Warranty (Length/Type): 3 Years
- Certifications: EU, REACH, CE (EU), FCC (USA), ICES-003 (Canada), KC (Korea), RCM (Aus/NZ)
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 0.50 Amps
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Active Power: 18 Watt
- Depth: 7.13 in
- Height: 1.42 in
- Width: 7.53 in
- Product Weight: 1.40 lbs
- Color: Black
- Form Factor: Standalone appliance, Rack-mountable: 1U, 1/2 rack (horizontal)
- Video Input: 1x HDMI
- Video Input Resolutions: HD and 4K broadcast resolutions
- Video Outputs: 1x HDMI (zero latency pass-through in Tx mode)
- Audio Input/Output: Up to 8 channels of audio embedded in HDMI signal, Unbalanced analog stereo input via 1/8“ (3.5mm) jack, Line Level
- Network Connector: 3x RJ45 (LAN 1 for Media and Control with PoE, LAN 2 for Media and Control (redundant), Control LAN for Control data)
- RS-232: Yes
- Control and management: Web browser-based UI, standalone utility
- Maximum Video Resolutions: 4096 x 2160 60p
- Color Space: YUV 4:2:0 10-bit1 and 8-bit2, YUV 4:2:2 10-bit3, RBG 4:4:4 8-bit, SDR/HDR4
- Video Scaling: High Quality multi-tap 10-bit Up/Down Scaler
- Video Deinterlacing: Yes
- Color Space Conversion: Yes
- HDCP Support: Yes
- Video: ProAV 4:4:4 8-bit codec; HD 200 Mbps, 4K 800 Mbps, Optional: JPEG-XS 4:2:2 10-bit; HD 400 Mbps, 4K 1.6 Gbps, Bitrates vary based on resolution
- Audio: Uncompressed PCM (~1 Mbps/ch)
- Latency: Less than a 1/4 frame (<4 ms)
- Network Standard: RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
- IP addressing: IPv4, IPv66, DHCP (default) and static IP
- Supported Protocols: SMPTE ST 2110 (-10, -20, -21, -30, -31, and -40), SMPTE ST 2059-2, SMPTE ST 2022-7
- Redundancy: Yes (ST 2022-7)
- Command and Control: HTTPS over TCP
- Discovery, Registration and Control: NMOS discovery and control according to standards IS-04 v1.3 and IS-05 v1.1
- PoE+: Yes (IEEE 802.3at Type 2)
- Cooling: Fanless
- Hardware included: ConvertIP DRH appliance
- Optional Hardware: ConductIP NMOS-based routing solution (Part #: CDCTIP-SERV)
- Accessories (sold separately): ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK8 ), Rackmount kit9 (Part #: RMK-19TR-A), Angled bracket kit (Part #: RMK-6BRKT-A), Secure cable solution for HDMI (Part #: SK-SLND-4), NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
- Software: Matrox ConvertIP Command Center (Web UI), Matrox ConvertIP Manager (Microsoft® Windows® 10)
- Optional Software: JPEG-XS codec license
- Operating Conditions: Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m), Humidity: 20% to 80% non-condensing
- Storage conditions: Temperature: -40 to 70 degrees Celsius, Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m), Humidity: 5% to 95% non-condensing
- Rack Units (Height): 1
CIP-DRS
- ConvertIP Dual-channel RJ45 SDI-to-IP Converter
CIP-DSH
- ConvertIP Dual-channel SFP HDMI-to-IP Converter
CIP-DSS
- ConvertIP Dual-channel SFP SDI-to-IP Converter
CIP-SRH
- ConvertIP Single-channel RJ45 HDMI-to-IP Converter
CIP-SRST
- ConvertIP Single-channel RJ45/SFP HDBaseT-to-IP converter
Converter
294231 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Coffman Media
close
Coffman Media
5995 Wilcox Place
Suite A
Dublin, OH 43016
USA
(614) 389-3456
https://www.coffmanmedia.com/
Contact in regards to this product:
Matrox Graphics Inc.
Model: CIP-DRH
United States Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you