M4500-48XF8C Managed Switch

Model: XSM4556

Part #: XSM4556-100NAS

A 10G to 100G solution
The M4500-32C offers 32-port QSFP28 preconfigured for 100G and can support 40G QSFP+ and 50G QSFP28 optics or DAC cables
The M4500-48XF8C offers 48-port SFP28 preconfigured for 10G with 8-port 100G QSFP28 uplinks, and the SFP28 ports can support 10G and 25G For Pro AV installations
Installers opting to use M4500 switches in their installation will find that it is already preconfigured out of the box True AV and multicast Zero Touch network configuration: Connect AV-over-IP encoders and decoders, and power on the switch. It just work
IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM (Protocol Independent Multicast) complexity

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

These switches combine the configurability of a matrix switcher with the power and scalability of Ethernet to support hundreds of AV over IP endpoints. M4300 and M4500 switches offer IGMP Plus and greatly simplify system architectures at a dramatically lower price point

A 10G to 100G solution
The M4500-32C offers 32-port QSFP28 preconfigured for 100G and can support 40G QSFP+ and 50G QSFP28 optics or DAC cables
The M4500-48XF8C offers 48-port SFP28 preconfigured for 10G with 8-port 100G QSFP28 uplinks, and the SFP28 ports can support 10G and 25G For Pro AV installations
Installers opting to use M4500 switches in their installation will find that it is already preconfigured out of the box True AV and multicast Zero Touch network configuration: Connect AV-over-IP encoders and decoders, and power on the switch. It just work
IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM (Protocol Independent Multicast) complexity
IGMP Plus is default on VLAN 1 out of the box and can be configured on another VLAN for automatic IGMP across M4500 and M4300 switches on that VLAN Higher availability
Meet the requirements of high performance, high availability, fast scale out, low latency performance, and continuous serviceability in sensible applications
The M4500 switches offer 1+1 power and 4+2 fan redundancy, an x86 Intel Atom® Processor C3558 with 8GB DDR3/ECC RAM and 128GB SSD storage Industry standard management
The M4500 switches come with an industry standard command line interface (CLI), SSH, SNMP, sFlow, and MLAG
An out of band 1 Gigabit Ethernet port facilitates management, with simplified macro-commands for AV-over-IP configuration Industry leading warranty
Includes-
Switch with two power supplies APS750W and six fan trays AFT402 already installed
Console cable with one DB9 female connector and one RJ-45 serial connector
Power cord(s)
Two mounting ears and screws for rack mounting (front)
One set of rail kits for rack mounting (back)
Installation guide

Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Number of Ports: 56
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 110 Volts
Depth: 20 in
Height: 1.70 in
Width: 17.32 in
Product Weight: 21.45 lbs
Warranty (Length/Type): Lifetime
Acoustics: 68.0dB @ 25°C
Power Consumption (max): 394 W
25G SFP28 Ports: 48 SFP28 ports (1x10G default mode, other modes can be 1x25G and 1x10G)
100G QSFP28 Ports: 8 QSFP28 ports (1x100G default mode, other modes can be 1x50G, 1x40G)
PSU and Fans: 2 modular Power Supply Units and 6 modular Fan Trays come pre-installed
Management: CLI only (local console, telnet port 1223 and SSH port 1234)
Management Ports: 1G Ethernet service port for out-of-band management (OOB, RJ45), RS232 straight-through serial RJ45 for local management console
Form Factor: Full width 1U

Switch 9265586 kb - Data Sheet

Project List

Switch 221437 kb - Instructions

Project List