Projectors & Accessories : Projectors : Panasonic - PT-DS12KU

12000 Lumens 3-chip DLP Projector

Series: Pro AV

Model: PT-DS12KU

3-chip DLP, 12000 lumens, SXGA+
High brightness and high contrast ratio make bright, crisp and sharp image
Dual lamp system with Lamp Relay mode enables 24/7 operation
10,000:1 contrast ratio
Edge blending function and colour matching

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

3-chip DLP projector. Panasonic's original dual-lamp system, with its new 380 W lamp, helps to make the body compact, while providing a full 12,000 lumens of brightness with 120 V AC operation. The replacement lamp unit (ET-LAD310A/ETLAD310AW) can be used with all of the PT-DZ8700/PT-DZ110X Series projectors. This reduces the number of lamp types that need to be kept in stock when multiple projectors are used. Panasonic's Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1* contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks and provides images with more detailed textures.

3-chip DLP, 12000 lumens, SXGA+
High brightness and high contrast ratio make bright, crisp and sharp image
Dual lamp system with Lamp Relay mode enables 24/7 operation
10,000:1 contrast ratio
Edge blending function and colour matching

Aspect Ratio - 4:3
Number of Imagers - 3-chip
Projector Applications - 3D
Projector Technology Type - DLP
Projector Type - Short Throw
Supported Resolution - SXGA+ (1400x1050)
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Brightness Full: 12000 lumens
Chip Quantity: 3
Contrast Ratio: 10000
Lamp Type: 380W UHM
Lens Type: Optional powered zoom/focus
Technology: DLP
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 220 Volts
Depth: 21.59 in
Height: 7.87 in
Width: 20.87 in
Product Weight: 52.91 lbs
Noise: 45 dB
DLP™ chip Panel size: 24.1 mm (0.95 inches) diagonal (4:3 aspect ratio)
DLP™ chip Display method: DLP™ chip x 3(R, G, B), DLP™ projection system
DLP™ chip Pixels: 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Screen Size: 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 4:3 aspect ratio
Center-to-corner uniformity: 90%
Scanning Frequency (SDI): Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 372 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; Dual-link HD-SDI signal (X' Y' Z' 4:4:4 12-bit): SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF; 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p; HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i)
Scanning Frequency (HDMI/DVI-D/RGB): Horizontal: 15 kHz-100 kHz, Vertical: 24 Hz-120 Hz, dot clock: 25-162 MHz or lower (HDMI/DVI: 25 MHz-162 MHz)
Scanning Frequency YPBPR (YCBCR): 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning Frequency (Video/S-Video): fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: +/-50 % (+/-40 % with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Optical axis shift Horizontal: +/-30 % (+/-20 % with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone Correction Range: Vertical +/-40°, horizontal +/-15°(vertical +/-22° and horizontal +/-15° with the ET-D75LE5/LE50, vertical +/-28° and horizontal +/-15° with the ET-D75LE6); When using only the KEYSTONE correction of the Geometric Adjustment function: Vertical +/-40°, horizontal +/-15°; When using the optional upgrade kit ET-UK20: Vertical +/-40° and horizontal +/-40° with the ET-D75LE1/LE2/LE10/LE20,vertical +/-45°and horizontal +/-40° with the ET-D75LE3/LE4/LE30/LE40, vertical +/-22° and horizontal +/-15° with the ET-D75LE5/LE50,vertical +/-28° and horizontal +/-15° with the ET-D75LE6; When using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function: Vertical +/-20°, horizontal +/-15°(vertical +/-8° and horizontal +/-8° with the ET-D75LE5/50,vertical +/-10° and horizontal +/-10° with the ET-D75LE6)
Installation: Ceiling/floor, front/rear
Terminals SDI IN 1: BNC x 1; Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-A); 3G-SDI signal: SMPTE ST 424 compliant; HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant
Terminals SDI IN 2: BNC x 1,Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-B); HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant
Terminals HDMI IN: HDMI 19-pin x 1, Deep Color, compatible with HDCP; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only.
Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz
Terminals RGB 1 IN: BNC x 5
Terminals RGB 1 IN R, G, B: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 1 IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals RGB 1 IN S-Video signal: Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals RGB 2 IN: D-sub HD 15-pin (female) x 1
Terminals RGB 2 IN R, G, B: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals RGB 2 IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals VIDEO IN: BNC x 1, 1.0 Vp-p, 75 ohms
Terminals 3D SYNC 1 IN/OUT: BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals 3D SYNC 2 OUT: BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
Terminals Remoter 1 In: M3 jack x 1 for wired remote control
Terminals Remoter 1 Out: M3 jack x 1 for link control
Terminals Remoter 2 In: D-sub 9-pin x 1 for external control (parallel)
Terminals LAN: RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™(class 1)
Power Cord Length: 3.0 m (9 ft 10 in)
Cabinet materials: Molded plastic
Operation noise: 45 dB (high mode), 43 dB (middle mode), 37 dB (eco mode)

ET-D75LE10 - 1.3 to 1.9:1 Zoom Lens for DZ8700/DW100/D12000 Series Projectors

ET-D75LE20 - 1.7 to 2.7:1 Zoom Lens for DZ8700/DW100/D12000 Series Projectors

ET-D75LE30 - 2.4 to 5.2:1 Zoom Lens for DZ8700/DW100/D12000 Series Projectors

ET-D75LE40 - Zoom Lens for PT-DZ21K, PT-DS20K, PT-DW17K Projectors

ET-D75LE50 - Fixed Focus Lens for DZ21K Series

ET-D75LE6 - 1.0 to 1.2:1 Zoom Lens for PT-D7700/W7000, D/DW10000, D/DZ12000 and DW100U Series Projectors

ET-D75LE8 - 8.0 to 15.0:1 Zoom Lens for PT-D7000/D10000/D12000 Series Projectors

PT-EX16KU - 16000 Lumen Large Venue Professional Projector, 1024 x 768 pixels

PT-RX110U - 10400 Lumens 1-chip DLP Solid Shine Laser Fixed Installation Projector

Projector 1785 kb - Data Sheet

Project List

ET-D75LE95
3-chip DLP Ultra Short Throw Lens

Suggested Products

10,000-Lumen 4K 3LCD Laser Projector - White

by EPSON

20,000-Lumen 4K 3LCD Laser Projector

by EPSON

Advanced RGB DCI-compliant Laser Projector

by Christie

AV-iQ Terms and Conditions | | Powered by AV-iQ

Cookie Consent

By using this website, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information.

Sounds Great!